Select A Source And Destination Tree; Model Your Consolidation Project - Novell SERVER CONSOLIDATION MIGRATION TOOLKIT 1.1 - ADMINISTRATION GUIDE 12-23-2005 Administration Manual

Table of Contents

9 Click Next to continue to the next screen.

6.3 Select a Source and Destination Tree

After you create a project file, you need to select your source and destination trees. To do this, you

must be logged in to the trees that you will be working in.

1 Select the source and destination eDirectory

or click Login to browse to a tree that is not in the drop-down list.

Only trees that you are currently logged in to are available on the drop-down list.

1a (Conditional) In the Novell Login dialog box, click Trees.

1b Browse to each desired tree and log in with the correct username and password.

If you do not know the tree name, in the Server field of the Login dialog box, type the IP

address or DNS name of the server that you will be consolidating to or from.

IMPORTANT: If you are performing a consolidation to an Nterprise

appliance, the Admin user's context is always appusers.

1c Click OK.

2 Click Next.

3 Click Create to finish creating the project file.

The Project Window (see

which Printer objects to move. The Project Window is divided into two panes that each show the

trees that you are working in.

Server Consolidation Utility Project Window

Figure 6-1

Figure

6-1) is where you select which volumes and directories to copy and

(NDS

) tree from the drop-down list provided

Consolidating Data from NetWare Servers

Branch Office

Table of Contents

Server consolidation and migration toolkit 1.1