Nic Connectors; Sata Connectors; Sas Module Slot; Table 57. Rj-45 10/100/1000 Nic Connector Pin-Out (J5A1, J6A1) - Intel BB5520UR Technical Product Specification

Intel® Server Boards S5520HC, S5500HCV, and S5520HCT TPS
6.5.2

NIC Connectors

The server boards provide two stacked RJ-45/2xUSB connectors side-by-side on the back edge
of the board (J5A1, J6A1). The pin-out for NIC connectors is identical and defined in the
following table.

Table 57. RJ-45 10/100/1000 NIC Connector Pin-out (J5A1, J6A1)

6.5.3

SATA Connectors

The server boards provide up to six SATA connectors: SATA-0 (J1G5), SATA-1 (J1G4), SATA-
2 (J1G1), SATA-3 (J1F4), SATA-4 (J1F1), and SATA-5 (J1E3).
The pin configuration for each connector is identical and defined in the following table:

Table 58. SATA/SAS Connector Pin-out (J1E3, J1G1, J1G4, J1G5, J1F1, J1F4)

Pin
1
2
3
4
5
6
7
6.5.4

SAS Module Slot

The server boards provide one SAS module slot (J2J1) to support the Intel
Module AXX4SASMOD card. The following table defines the pin-out:
Pin
1 P3V3_AUX
3 SW_RAID_MODE
5 PE_ICH10_SAS_SW_C_TP0
7 GND
Revision 1.8
Pin
1 GND
2 P1V8_NIC
3 NIC_A_MDI3P
4 NIC_A_MDI3N
5 NIC_A_MDI2P
6 NIC_A_MDI2N
7 NIC_A_MDI1P
8 NIC_A_MDI1N
9 NIC_A_MDI0P
10 NIC_A_MDI0N
11 NIC_LINKA_1000_N (LED
12 NIC_LINKA_100_N (LED)
13 NIC_ACT_LED_N
14 NIC_LINK_LED_N
15 GND
16 GND
Signal Name
GND
SATA TX_P_C
SATA TX_N_C
GND
SATA _RX_N_C
SATA _RX_P_C
GND

Table 59. SAS Module Slot Pin-out (J2J1)

Name
Intel order number E39529-013
Connector/Header Locations and Pin-outs
Signal Name
Description
Ground
Positive side of transmit differential pair
Negative side of transmit differential pair
Ground
Negative side of receive differential pair
Positive side of receive differential pair
Ground
Pin
2 RST_LPC_SAS_N
4 GND
6 PE_ICH10_SAS_SW_C_TN0
8 GND
®
SAS Entry RAID
Name
113