Intel BB5520UR Technical Product Specification page 17

Intel® Server Boards S5520HC, S5500HCV, and S5520HCT TPS
Feature
Add-in Card Slots • Intel
• Intel
• Optical devices are supported
Hard Drive and
Optical Drive
• Six SATA connectors at 1.5 Gbps and 3 Gbps
Support
• Four SAS connectors at 3 Gbps through optional Intel
• Intel
RAID Support
• Intel
• IT/IR RAID through optional Intel
• 4 ports full featured SAS/SATA hardware RAID through optional Intel
• One internal type A USB port with USB 2.0 support that supports a peripheral, such as a
USB Drive Support
• One internal low-profile USB port for USB Solid State Drive
• External connections:
I/O control support
• Internal connections:
Video Support • ServerEngines* LLC Pilot II* with 64 MB DDR2 memory, 8 MB allocated to graphics
• Two Gigabit through Intel
LAN
• Trusted Platform Module
Security**
Revision 1.8
®
Server Board S5520HC/S5520HCT: Six expansion slots
One full-length/full-height PCI Express* Gen2 slot (x16 Mechanically, x8 Electrically)
Three full-length/full-height PCI Express* Gen2 x8 slots
One full-length/full-height PCI Express* Gen1 slot (x8 Mechanically, x4 Electrically)
shared with SAS Module slot*.
One 32-bit/33 MHz PCI slot, keying for 5-V and Universal PCI add-in card
®
Server Board S5500HCV: Five expansion slots
One full-length/full-height PCI Express* Gen2 slot (x16 Mechanically, x4 Electrically)
Two full-length/full-height PCI Express* Express* Gen2 x8 slots
One full-length/full-height PCI Express* Gen1 slot (x8 Mechanically, x4 Electrically)
shared with SAS Module slot*.
One 32-bit/33 MHz PCI slot, keying for 5-volt and Universal PCI add-in card
AXX4SASMOD
®
Embedded Server RAID Technology II through onboard SATA connectors provides
SATA RAID 0, 1, and 10 with optional RAID 5 support provided by the Intel
Activation Key AXXRAKSW5
®
Embedded Server RAID Technology II through optional Intel
Module AXX4SASMOD provides SAS RAID 0, 1, and 10 with optional RAID 5 support
®
provided by the Intel RAID Activation Key AXXRAKSW5
level hardware RAID 0, 1, 10/10E, and native SAS pass through mode
Module SROMBSASMR (AXXROMBSASMR), provides RAID 0, 1, 5, 6 and striping
capability for spans 10, 50, 60.
floppy drive
DB9 serial port A connection
One DH 10 serial port connector (optional)
Two RJ-45 NIC connectors for 10/100/1000 Mb connections: Dual GbE through the
®
Intel 82575EB Network Connection.
Four USB 2.0 ports at the back of the board
Two 9-pin USB headers, each supports two USB 2.0 ports
One DH10 serial port B header
Six SATA connectors at 1.5 Gbps and 3 Gbps
Four SAS connectors at 3 Gbps (optional)
One SSI-compliant 24-pin front control panel header
Integrated 2D video controller
Dual monitor video mode is supported
support
Intel order number E39529-013
Description
®
SAS Entry RAID Module AXX4SASMOD provides entry-
®
82575EB PHYs with Intel
®
SAS Entry RAID Module
®
RAID
®
SAS Entry RAID
®
Integrated RAID
®
I/O Acceleration Technology 2
Overview
3