Table 35. Setup Utility - Boot Options Screen Fields - Intel BB5520UR Technical Product Specification

BIOS Setup Utility
Setup Item
Boot Timeout 0 - 65535
Boot Option #x Available
boot
devices.
Hard Disk Order
CDROM Order
Floppy Order
Network Device
Order
BEV Device Order
Add New Boot
Option
Delete Boot Option
Enabled
EFI Optimized Boot
Disabled
Enabled
Use Legacy Video
for EFI OS
Disabled
Enabled
Boot Option Retry
Disabled
USB Boot Priority
Enabled
Disabled
100
Table 35. Setup Utility — Boot Options Screen Fields
Options
The number of seconds the BIOS should pause at
the end of POST to allow the user to press the
[F2] key for entering the BIOS Setup utility.
Valid values are 0-65535. Zero is the default. A
value of 65535 causes the system to go to the
Boot Manager menu and wait for user input for
every system boot.
Set system boot order by selecting the boot option
for this position.
Set the order of the legacy devices in this group.
Set the order of the legacy devices in this group.
Set the order of the legacy devices in this group.
Set the order of the legacy devices in this group.
Set the order of the legacy devices in this group.
Add a new EFI boot option to the boot order.
Remove an EFI boot option from the boot order.
If enabled, the BIOS only loads modules required
for booting EFI-aware Operating Systems.
If enabled, the BIOS will use the legacy video
ROM instead of the EFI video ROM.
If enabled, this continually retries non-EFI-based
boot options without waiting for user input.
If enabled newly discovered USB devices will be
put to the top of their boot device category.
If disabled newly discovered USB devices will be
put at the bottom of the respective list
Intel order number E39529-013
Intel® Server Boards S5520HC, S5500HCV, and S5520HCT TPS
Help Text Comments
After entering the necessary
timeout, press the Enter key
to register that timeout value
to the system. These
settings are in seconds.
Displays when one or more
hard disk drives are in the
system.
Displays when one or more
CD-ROM drives are in the
system.
Displays when one or more
floppy drives are in the
system.
Displays when one or more
of these devices are
available in the system.
Displays when one or more
of these devices are
available in the system.
This option is only displayed
if an EFI bootable device is
available to the system (for
example, a USB drive).
If the EFI shell is deleted, it
is restored on the next
system reboot. It cannot be
permanently deleted.
Grayed out when [SW
RAID] SATA Mode is
Enabled. SW RAID can only
be used in Legacy Boot
mode.
Only displays when EFI
Optimized Boot is enabled.
Revision 1.8