JETWAY 993BSR4A User Manual page 21

The Power Management Setup allows you to configure you system to most effectively save
energy while operating in a manner consistent with your own style of computer use.
ACPI function
Power Management
PM Control by APM
Video Off After
Video Off Method
MODEM Use IR Q
Soft-off by PWRBTN
HDD Power Down
Do z e Mode
Suspend Mode
VGA
LPT & COM
HDD & FDD
DMA/master
Modem Ring Resume
RTC Alarm Resume
Esc: Q u it
F1 : Help
F5 : Old Values (Shift)F2 : Color
•
Power Management:
saving and is directly related to the following modes:
Doze Mode , Standby Mode ,Suspend Mode , HDD Power Down
There are four selections for Power Management, three of which have fixed mode settings.
Disable (default)
Min. Power Saving
Max. Power Saving Maximum power management -- ONLY AVAILABLE FOR SL
User Defined
•
PM Control APM:
activated to enhance the Max. Power Saving mode and stop the CPU internal clock.
If the Max. Power Saving is not enabled, this will be preset to No.
•
Video Off Method: This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
Blank Screen
DPMS
•
Video Off After: When enabled, this feature allows the VGA adapter to operate in a power
saving mode.
ROM PCI/ISA BIOS (2A6LGJ1F)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Enabled
: User Define
: Yes
: Suspend
: V/H SYNC + B lank
: 3
: Instant-off
: Disabled
: Disabled
: Disabled
** PM Events **
: OFF
: LPT/COM
: ON
: OFF
: Disabled
: Disabled
¡ ô ¡ õ ¡ ÷ ¡ ö : Select Item
Pu/Pd/ + / -: Modify
This category allows you to select the type (or degree) of power
No power management. Disables all four modes
Minimum power management. Doze Mode = 1 hr. Standby Mode
= 1 hr., Suspend Mode = 1 hr., and HDD Power Down = 15 min.
CPU'S. Doze Mode = 1 min., Standby Mode = 1 min., Suspend
Mode = 1 min., and HDD Power Down = 1 min.
Allows you to set each mode individually. When not disabled,
each of the ranges are from 1 min. to 1 hr. except for HDD Power
Down which ranges from 1 min. to 15 min. and disable.
When enabled, an Advanced Power Management device will be
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
Primary INTR
IR Q 3 (COM 2)
IR Q 4 (COM 1)
IR Q 5 (LPT 1)
IR Q 6 (Floppy Disk) : Primary
IR Q 7 (LPT 1)
IR Q 8 (RTC Alarm)
IR Q 9 (IR Q 2 Redir)
IR Q 1 0 (Reserved)
IR Q 1 1 (Reserved)
IR Q 1 2 (PS/2 Mouse)
IR Q 1 3 (Coprocessor) : Primary
IR Q 1 4 (Hard Disk)
IR Q 1 5 (Reserved)
F6 : Load Optimal Defaults
F7 : Load Standard Defaults
Figure 3-4
19
: ON
: Primary
: Primary
: Primary
: Primary
: Disabled
: Secondary
: Secondary
: Secondary
: Primary
: Primary
: Disabled