Smart Fan Configurations - JETWAY 939AGPECR110 User Manual

Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled
CPU Thermal Throttling Temp
This item allows you to activate the CPU Thermal Throttling function when the CPU
temperature is over the value which you set to low down the CPU temperature when at high
workload to protect processor from damage or accidental shutdown.

Smart FAN Configurations

Please refer to section 3-10-1
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-10-1 Smart FAN Configurations
CPUFAN Smart Mode
x CPU SmartFAN Full-Speed Temp
x CPU SmartFAN Idle Temp
SFAN1 Smart Mode
x SFAN1 SmartFAN Full-Speed Temp
x SFAN1 SmartFAN Idle Temp
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
CPU/SFAN1 Smart FAN Full-Speed Temp
This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN will
works over 60% of full speed, and the higher temperature will gain higher FAN speed, after
over the temperature which this item setting, the FAN works in full speed.
CPU/SFAN1 Smart FAN Idle Temp
This item allows you setting the FAN works in 60% of full speed, when the temperature lower
than the temperature which you setting.
Phoenix – AwardBIOS CMOS Setup Utility
Smart FAN Configurations
Disabled
50 C
30 C
Disabled
35 C
30 C
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
34
Item Help
F1:General Help