Advanced Bios Features - JETWAY 939AGPECR110 User Manual

Time
The time format is <hour><minute><second>.
Primary Master/Primary Slave
Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications
of your drive must match with the drive table. The hard disk will not work properly if you
enter improper information for this category. If your hard disk drive type is not matched or
listed, you can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter
the information directly from the keyboard. This information should be provided in the
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be "None"
The settings are Auto Normal, Large, and LBA.
Access Mode
Cylinder number of cylinders
number of heads
Head
Precomp write precomp
landing zone
Landing Zone
Sector number of sectors

3-5 Advanced BIOS Features

Anti-Virus Protection
L1 Cache
L2 Cache
Quick Power On Self Test
SATA &SCSI Boot Order
First Boot Device
Second Boot Device
Third Boot Device
Boot other Device
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability
Report No FDD For Windows
Video BIOS Shadow
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Disabled
Enabled
Enabled
Enabled
SATA, SCSI
Floppy
HDD-0
CDROM
Enabled
Enabled
On
Fast
Disabled
6
250
Setup
Enabled
1.4
Non-OS2
Disabled
Yes
Enabled
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
23
Item Help
F1:General Help