Miscellaneous Control - JETWAY 939AGPECR110 User Manual

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
Auto Detect PCI Clock
Spread Spectrum
Linear PCIExpress Clock
** Current CPU Clock
CPU Clock at Next Boot
** Current DRAM Clock
DRAM Clock at next Boot
CPU FID Select
CPU Vcore Select
Over Voltage
VDIMM Select
SBChip VDD Select
NBChip VDD Select
CPU Vcore 7-Shift
Flash Port Write Protect
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect PCI Clock
This item allows you to enable/disable auto detect PCI Clock.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
DRAM Clock at next Boot is
This field displays the capability of the memory modules that you can use
VDIMM Select
This item allows you to select 2.5V of the DDR Module. The choice are: 2.55V, 2.6V, 2.65V,
2.7V.
VAGP Output
This item allows you to select 1.5V of the AGP 4X/8X VGA card. The choice are: 1.5V, 1.6V,
1.7V, 1.8V.
VCC2.5 Voltage Select
This item allows you to select 2.5V of the VCC2.5V Voltage. The choice are: 2.55V, 2.6V,
2.65V, 2.7V.
CPU Vcore 7-Shift
This item allows you select the CPU Vcore Voltage 50mV more than the standard value by
each step , by this function for the precise over-clocking for extra demanding of performance.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
F6:Optimized Defaults
Enabled
Disabled
99
200Mhz **
100
200MHZ **
200MHz(Auto)
Default
Default
Enabled
2.50V(Default)
2.55V(Default)
1.60V(Default)
Normal
Enabled
F7:Standard Defaults
35
Item Help
Menu Level >
F1:General Help