Table of Contents
Advertisement
3-10-1 Smart FAN Configurations
CPUFAN Smart Mode
XCPUFAN Full-Speed Temp
XCPUFAN Idle Temp
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
CPUFAN Full-Speed Temp
This item allows you setting the FAN works in full speed when the temperature over the
value which out set. If the temperature below the value but over the Idle Temperature, the
FAN will works over 60% of full speed, and the higher temperature will gain higher FAN
speed, after over the temperature which this item setting, the FAN works in full speed.
CPUFAN Idle Temp
This item allows you setting the FAN works in 60% of full speed, when the temperature
lower than the temperature which you setting.
3-11 Bi-Turbo Configurations
Bi-Turbo Technology Mode
Bi-Turbo Activated Threshold
Bi-Turbo Activated Time
Bi-Turbo CPU Clock Setting
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
Smart FAN Configurations
Disabled
50
30
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Bi-Turbo Configurations
Enabled
60%
0.50s Later
200MHz
CPU Thermal-Throttling
Disabled ．．．．．[
．．．．．[
Enabled
↑↓:Move ENTER:Accept ESC:Abort
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
Menu Level >
]
]
F7:Standard Defaults
42
Item Help
F1:General Help
Item Help
F1:General Help
Advertisement
Table of Contents
