Table of Contents
Advertisement
Smart FAN Configurations
Please refer to section 3-10-1
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-10-1 Smart FAN Configurations
CPUFAN Smart Mode
x CPU SmartFAN Full-Speed Temp
x CPU SmartFAN Idle Temp
SFAN1 Smart Mode
x SFAN1 SmartFAN Full-Speed Temp
x SFAN1 SmartFAN Idle Temp
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
CPU/SFAN1 Smart FAN Full-Speed Temp
This item allows you setting the FAN works in full speed when the temperature over the value
which out set. If the temperature below the value but over the Idle Temperature, the FAN will
works over 60% of full speed, and the higher temperature will gain higher FAN speed, after
over the temperature which this item setting, the FAN works in full speed.
CPU/SFAN1 Smart FAN Idle Temp
This item allows you setting the FAN works in 60% of full speed, when the temperature lower
than the temperature which you setting.
3-11 Bi-Turbo Configurations
Bi-Turbo Technology Mode
Bi-Turbo Activated Threshold
Bi-Turbo Activated Time
Bi-Turbo CPU Clock Setting
CPU Thermal-Throttling
x CPU Thermal-Throttling Temp
x CPU Thermal-Throttling Duty
x CPU Thermal-Throttling Beep
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
***** When the CPU Host clock is over the CPU default value in Power User OverClock Setting,
BIOS will auto disabled Bi-Turbo function.
Phoenix – AwardBIOS CMOS Setup Utility
Smart FAN Configurations
Disabled
50 ° C
30 ° C
Disabled
35 ° C
30 ° C
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
BiTurbo Configurations
Disabled
60%(CPU Usage)
0.50s Later
202MHz
Disabled
85 ° C
50.00%
Enabled
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
Menu Level >
F7:Standard Defaults
34
Item Help
F1:General Help
Item Help
F1:General Help
Advertisement
Table of Contents
