Table of Contents
Advertisement
Mio Attaché Application Operations
Setting The LCD Configuration
With a new KeypadBuilder project file open, click LCD Configuration in the Navigation Pane. After
you have set the options you need, click OK.
Display Options
Under LCD Display Resolutions, select the arrangement for your LCD device.
Dynamic Text
If you want to designate any lines as dynamic you must make a selection under Dynamic Text.
Based on the number of lines you select as being dynamic, the rest are allocated to menu items. It is
possible to have either all or no dynamic lines.
If you established dynamic items, select to display the dynamic items at the Top or Bottom under Align.
The display lines cannot alternate between menu and dynamic items.
Line Options
Based on your selection in the Dynamic Text section, the Line Options section could be populated with
all menu items, all dynamic items or a mix of the two.
1. Click on the line number you want to edit.
2. You can change the justification of menu items. Click the radio button to move the item either Left,
Center, or Right.
In addition to justification you can set other values for dynamic items:
Sleep Screen Display Options
You can set the LCD to display an image when not in use or "sleep" mode. The image must be
monochrome and cannot exceed 96 x 96 pixels.
1. Click the Import Icon... button to launch the Import Splash Screen Icon File dialog window.
2. Locate your file and click Open. Below the image reads, "Splash Screen Active."
74
Click on the font family and the number of lines to display on the device menu.
Click on the number of lines you want set as dynamic.
Click the radio button next to either Top or Bottom.
Remove the check next to Visible to remove the dynamic item from the display.
Place a check next to Level to make the dynamic display line a level indicator.
If you set the dynamic line as a level, click the Level Style you want to display.
KeypadBuilder v2.1
Advertisement
Table of Contents
