Add A Menu Item (Unicode); Edit Sub-Menu Properties - AMX KEYPADBUILDER Manual

Add a Menu Item (Unicode)

1. In the Fixed Menu Edit dialog window, select Add Menu Item in the Main Menu field.
2. Click Add Item to launch the Add/Edit Menu Item dialog window.
3. Enter the Unicode text in the Menu Caption field. The corresponding Unicode Send Command
Value is displayed beneath the text box.
4. Click OK to return to the Add/Edit Menu Item dialog window.
5. Place a check in the boxes of all items that apply:
6. If this menu item requires a channel assignment either type it or click Auto Assign to have
KeypadBuilder allocate the next available channel.
If you are uncertain as to what channels have been assigned where, click Channel Map to see.
7. Click OK when you are done.

Edit Sub-Menu Properties

By default KeypadBuilder is set to create the display items in text. If you plan to use Unicode you must
set it before adding any sub-menu items. You can only edit and add sub-menu properties when they have
been assigned to menu items.
1. In the Fixed Menu Edit dialog window, select a main menu item that has a sub-menu.
2. Edit Sub-Menu Properties in the Sub Menu field.
3. Click Edit to launch the Edit Keypad Menu dialog window.
4. Click either the Text or Unicode radio button under the Menu Type section. This setting applies to all
sub-menu items.
Under Menu Channel Map notice the Button field is a list of the button numbers with the names you
assigned in the Button Configuration module. The box directly to the right of Button displays the
currently selected button number. You can select buttons by either clicking on them in the Button list or
selecting the button on the graphic keypad device.
If the buttons are not locked to a particular channel, you can assign channels at this time. These channel
assignments only apply when you have selected the menu item. You can either:
If you are uncertain as to what channels have been assigned where, click Channel Map to see.
5. Click Update after you make changes to each button.
6. Click OK after you are done.
KeypadBuilder v2.1
Has Sub-Menu - Creates an entry beneath this display item.
Separator - This display item has no value and therefore cannot have any other box selections.
This does count as one of your display lines.
Select Active - Item executes upon selection; does not require a select menu action.
Return to Main - The menu returns to the top level after this item has been selected.
Type the channel number in the field next to Channel.
Click the UP and DOWN arrows next to the Channel field to navigate through the numbers.
Click Auto Assign and KeypadBuilder will allocate the next available channel.
Mio Modero Application Operations
33