Mio Attaché Configuration Modules
Device Selection
The Device Selection section contains a drop down list of all keypad devices capable of being
programmed by KeypadBuilder. Select the keypad device you wish to design for, and the device appears
in the window below. Assign the keypad device's color at this time in the drop down list for Color
Selection; the type of device will dictate what colors you can pick.
Changing the device selection clears any previous unsaved work.
Click OK to keep changes and exit the Project Properties module; otherwise, click Cancel and lose the
changes.
Button Configuration
The Button Configuration module allows you to set the keypad button properties.
Graphic
interface
for keypad
device
FIG. 22
Button Configuration Dialog Window
Keypad Device
The Keypad Device area is a graphic representation of your keypad device. Click on a button to select
and assign properties.
56
Button Properties
Configuration
Options
Display
Options
KeypadBuilder v2.1