Table of Contents
Advertisement
Mio Modero Application Operations
Creating A New Project
To create a new KeypadBuilder file, go to File > New Project. The device type that opens depends upon
what is set in the Preferences menu.
Setting The Project Configuration
With a new KeypadBuilder project file open, click Project Properties in the Navigation Pane.
1. Under the Project Information section set the applicable fields:
2. Under the Device Selection section, establish the device that uses the keypad project file. If the
keypad device differs from the default file that opened, select the keypad device from the drop down
menu.
3. Select the color of your keypad device from the drop down list, Color Selection.
4. Click OK to confirm the changes or Cancel to exit and drop all changes.
Setting The Button Configuration
With a new KeypadBuilder project file open, click Button Configuration in the Navigation Pane.
1. By clicking on a button in the Keypad Device area, select a button you wish to configure.
Under Button Properties:
2. Type the name of the button in the Name field. The button name is useful in tracking channel
assignments. This name should not be confused with what is sent to engraving, this name is strictly
within KeypadBuilder.
3. Enter the Channel Code for the button assignment in the field provided. KeypadBuilder inserts the
next available code if you click Auto Assign.
4. Set the Menu Action value by selecting one from the drop down list. A menu action interacts with
the fixed menu items you can set later.
If you have a menu system, it is a good idea to be aware of possible navigation
issues. When you have more menu line items than what is supported by your device
display, an Up and Down menu action allows you to access them. If you have sub-
menus, you might need a Home menu action to return you to the main menu.
KeypadBuilder v2.1
Project Name - This is user defined. Type the name of your project in this field.
Designer - Type the name of the keypad project designer in this field.
Dealer - Type the name of the Dealer providing the keypad project file.
Project Order - If the keypad project has a project order number, type it in this field.
Sales Order - If the keypad project has a sales order number, type it in this field.
Comments - Any additional comments concerning the project file can be entered in this box.
The Number field cannot be edited, it is set by the firmware for the keypad device
selected.
Placing a check next to Lock Channel for Menus and Sub Menus makes the assigned
channel code unavailable for any other button assignments.
Up - moves the navigation up through the menu system.
Down - moves the navigation down through the menu system.
Select - activates the navigation item in the menu system.
Home - returns the navigation back to the main menu system.
Mio Modero Application Operations
29
Advertisement
Table of Contents
