Table of Contents
Advertisement
Mio Modero Application Operations
Sleep Screen Display Options
You can set the LCD to display an image when not in use or "sleep" mode. The image must be
monochrome and cannot exceed 96 x 96 pixels.
1. Click the Import Icon... button to launch the Import Splash Screen Icon File dialog window.
2. Locate your file and click Open. Below the image reads, "Splash Screen Active."
Setting The Fixed-Menu Configuration
With a new KeypadBuilder project file open, click Fixed-Menu Configuration in the Navigation Pane.
Click Close when you have set all options necessary.
Edit Menu Properties
By default KeypadBuilder is set to create the display items in text. If you plan to use Unicode you must
set it before adding any menu items, the same applies when adding sub menus.
1. In the Fixed Menu Edit dialog window, select Edit Menu Properties in the Main Menu field.
2. Click Edit to launch the Edit Keypad Menu dialog window.
3. Click either the Text or Unicode radio button under the Menu Type section. This setting applies to all
menu items.
Under Menu Channel Map notice the Button field is a list of the button numbers with the names you
assigned in the Button Configuration module. The box directly to the right of Button displays the
currently selected button number. You can select buttons by either clicking on them in the Button list or
selecting the button on the graphic keypad device.
If not already set, you can assign channels at this time. You can either:
If you are uncertain as to what channels have been assigned where, click Channel Map to see.
4. Click Update after you make changes to each button.
5. Click OK after you are done.
Add a Menu Item (Text)
1. In the Fixed Menu Edit dialog window, select Add Menu Item in the Main Menu field.
2. Click Add Item to launch the Add/Edit Menu Item dialog window.
3. Type the name of the menu item as it is to display in the LCD in the field Item Caption.
4. Place a check in the boxes of all items that apply:
5. If this menu item requires a channel assignment either type it or click Auto Assign to have
KeypadBuilder allocate the next available channel.
If you are uncertain as to what channels have been assigned where, click Channel Map to see.
6. Click OK when you are done.
32
Type the channel number in the field next to Channel.
Click the UP and DOWN arrows next to the Channel field to navigate through the numbers.
Click Auto Assign and KeypadBuilder will allocate the next available channel.
Has Sub-Menu - Creates an entry beneath this display item.
Separator - This display item has no value and therefore cannot have any other box selections.
This does count as one of your display lines.
Select Active - Item executes upon selection; does not require a select menu action.
Return to Main - The menu returns to the top level after this item has been selected.
KeypadBuilder v2.1
Advertisement
Table of Contents
