Cisco 7246VXR - uBR Router Software Configuration Manual page 91

Chapter 1 Overview of Cisco uBR7200 Series Software
To configure access control lists (ACLs) for inbound connections to all COPS listener applications on
the Cisco CMTS, user the cops listeners access-list command in global configuration mode. To remove
this setting from the Cisco CMTS, us the no form of this command.
Syntax Description acl-num
acl-name
Additional Information
Refer also the Service Independent Intercept (SII) feature in this document. For additional information,
refer to the following documents on Cisco.com:
•
•
•
•
Cable Monitor Enhancements
Cisco IOS Release 12.3(17a)BC introduces the following enhancements to the cable monitor feature:
•
•
For additional information about this enhancements to the cable monitor feature, refer to the following
documents on Cisco.com:
•
OL-2239-05
cops listeners access-list {acl-num | acl-name}
no cops listeners access-list {acl-num | acl-name}
Alphanumeric identifier of up to 30 characters, beginning with a letter that
identifies the ACL to apply to the current interface.
Numeric identifier that identifies the access list to apply to the current
interface. For standard access lists, the valid range is 1 to 99; for extended
access lists, the valid range is 100 to 199.
Configuring COPS for RSVP, Cisco IOS Versions 12.2 and 12.3
http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfcops_ps1835_TSD_Produ
cts_Configuration_Guide_Chapter.html
Cable Monitor and Intercept Features for the Cisco CMTS
http://www.cisco.com/en/US/docs/cable/cmts/feature/guide/ufg_cmon.html
PacketCable and PacketCable Multimedia on the Cisco CMTS
http://www.cisco.com/en/US/docs/cable/cmts/feature/guide/ufg_pkcb.html
Cisco PacketCable Primer White Paper
http://www.cisco.com/en/US/netsol/ns341/ns121/ns342/ns343/networking_solutions_white_paper
09186a0080179138.shtml
Access Control Lists are now supported on the Cisco uBR-MC5X20U/D and Cisco uBR-MC28U
cable interface line cards
Unconditional downstream sniffing now enables downstream packets to be monitored, either for
MAC or data packets. This enhancement supports both DOCSIS and Ethernet packet encapsulation.
Cable Monitor and Intercept Features on the Cisco CMTS
http://www.cisco.com/en/US/docs/cable/cmts/feature/guide/ufg_cmon.html
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
Supported Software Features for the Cisco uBR7200 Series
1-73