Cisco 7246VXR - uBR Router Software Configuration Manual page 61

Chapter 1 Overview of Cisco uBR7200 Series Software
Command Modes User EXEC, Privileged EXEC
Command History Release
11.3 NA
12.0(2)XC
12.1(5)EC1
12.2(1)XF1
12.0(16)SC2,
12.1(10)EC1,
12.2(4)BC1b
12.2(15)CX
12.2(15)BC2b
12.3(9a)BC
Usage Guidelines The mem-stat, memory, and proc-cpu keywords execute the related command on the processor that
runs on added to obtain the relevant information from the onboard processor on Broadband Processing
Engine (BPE) cable interface line cards, such as the Cisco uBR-MC16U/X, Cisco uBR-MC28U/X, and
Cisco uBR-MC5X20S/U cards. This allows you to obtain information that is specific for that particular
cable interface card, as opposed to having to run these commands on the entire router.
Note The mem-stat, memory, and proc-cpu options are not available for cable interface line cards that do not
contain an onboard processor (for example, the Cisco uBR-MC16C card).
Examples The following is sample output for the downstream connection for slot 3 on port 0 on Cisco CMTS router
from the show controllers cable downstream command:
CMTS01# show controllers cable 3/0 downstream
Cable 3/0 Downstream is up
Frequency not set, Channel Width 6 MHz, 64-QAM, Symbol Rate 5.056941 Msps
FEC ITU-T J.83 Annex A, R/S Interleave I=12, J=17
OL-2239-05
Modification
This command was introduced.
This command was modified to show a number of additional fields.
Support was added for the Cisco uBR7100 series router, including
information about the Cisco uBR7100 series integrated upconverter.
Support was added for the Cisco uBR10012 router.
The algorithm for calculating the SNR value was enhanced for a more
accurate value.
Support was added for the Cisco uBR-MC28U/X cable interface line card,
including the display of the number of packets dropped because they were
for a Service Flow ID (SFID) of 0.
The mem-stat, memory, and proc-cpu options were added to obtain
processor information from the onboard processor on Broadband Processing
Engine (BPE) cable interface line cards, such as the Cisco uBR-MC16U/X,
Cisco uBR-MC28U/X, and Cisco uBR-MC5X20S/U cards.
Adds the tech-support option to improve information required during
technical support.
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
Supported Software Features for the Cisco uBR7200 Series
1-43