Cisco 7246VXR - uBR Router Software Configuration Manual page 31

Chapter 1 Overview of Cisco uBR7200 Series Software
Network Interface Port Adapters
The Cisco uBR7200 series routers support multiple port adaptors with Ethernet, Gigabit Ethernet and
Serial versions. Enhancements and options are available in multiple Cisco IOS Software release trains.
For the latest information about supported port adaptors, refer to Cisco uBR7200 Series Software Release
Notes on Cisco.com:
Not all Cisco uBR7200 series routers support all port adapters. Some port adapters must be at certain
Note
revision levels to be used in the Cisco uBR7246 VXR router.
Cisco recommends using the most current release in a release train if possible.
Note
Cable Interface Line Cards
The Cisco uBR7200 series supports the following cable interface line cards, all of which provide
connection to the hybrid fiber-coaxial (HFC) network.
Table 1-6
uBR7200 series routers.
Table 1-6
Cable Interface
Line Card
MC11C
MC12C
MC14C
MC16C
MC16E
MC16S
MC28C
MC28C-BNC
For the latest information about supported cable interface line cards, refer to Cisco uBR7200 Series
Software Release Notes on Cisco.com:
OL-2239-05
http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/release/notes/12_3bc/123BCu72.html
provides a quick overview of the cable interface line cards that are supported with Cisco
Cisco uBR7200 Series Cable Interface Line Cards
Upstream
Ports
1
2
4
6
6
6
8
8
http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/release/notes/12_3bc/123BCu72.html
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
Downstream
Ports Additional Features
1
1
1
1
1 EuroDOCSIS (Annex A) Support
1 Enhanced software- and hardware-based Spectrum
Management Support
2
2 BNC connectors instead of F-connectors
Cisco uBR7200 Series Chassis Overview
1-13