Cisco 7246VXR - uBR Router Software Configuration Manual page 275

Appendix A Installing or Upgrading Cisco IOS Software
Enter configuration commands, one per line.
Router(config)# tf
Router(config)# tftp-server ?
flash:
flh:
lex:
null:
nvram:
system:
Router(config)# tftp-server
Router(config)# tftp-server flash:?
flash:c2500-jos56i-l.120-9.bin
Router(config)# tftp-server flash:c2500-jos56i-l.120-9.bin
Router(config)# ^Z
Router#
After the TFTP server is configured, you can download the specified image from the router using the
Step 3
copy tftp flash command, as if it were a classic TFTP server.
The IP address of your TFTP server is the address of the router on which you configured the tftp-server
Note
command.
OL-2239-03
Allow URL file TFTP load requests
Allow URL file TFTP load requests
Allow URL file TFTP load requests
Allow URL file TFTP load requests
Allow URL file TFTP load requests
Allow URL file TFTP load requests
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
Copying a System Image from One Device to Another
End with CNTL/Z.
A-5