9
Inserting the needles on the PFAFF 1296
.02
Fig. 9 - 02
2
The choice of needle depends on the version of the machine and the sewing
thread and material in use (see Chapter 3, Specifications).
● Set needle bar at top position and loosen
screws 1.
● Push needles 2 fully in (the long groove
of the left needle must face to the right
and that of the right needle to the left).
● Tighten screws 1 again.
1
Setting up
Switch the machine off!
Danger due to unintentional
starting of the machine!
Only use needles from the
system intended for the
machine, see Chapter 3
Specifications.
9 - 2