Table of Contents
Advertisement
Section 2 — Hardware Installation
Category Button Configuration
Level Button Configuration
Keycap Transparency Labels
46
of button numbers and the name of the router input associated with each
button. The CP Input set is assigned to the panel using the MPK Devices
table.
For more information about button configuration, see CP Input and CP
Output Sets
on page
61.
Category buttons exist on some panels, allowing the pre-selection of cate-
gories of Sources or Destinations. The categories can be customized, by cre-
ating a custom Jupiter CP Category set table. This CP Category set would
then be assigned to the CP Input set, which would in turn be assigned to
the panel using the MPK Devices table.
For more information about button configuration, see CP Input and CP
Output Sets
on page
61.
Some panels include a cluster of eight buttons on the right side that can be
configured and labeled to select router levels. This can be done by creating
a suitable CP Level set which lists the router levels in the order they should
be available using the eight buttons. The CP Level set is assigned to the
panel using the MPK Devices table.
For more information about level button configuration, see CP Level Set
page
61.
A sheet of pre-cut transparency keycap labels, part no. 335835400, is avail-
able for use with Jupiter L-S Series Control panels. The large labels measure
0.38 x 0.38 inches (9.65 x 9.65 mm). The small labels measure 0.3 x 0.3 inches
(7.62 x 7.62 mm). The font is Helvetica condensed oblique See
page
47.
JUPITER L-S and LCD Series Control Panel Instruction Manual
on
Figure 18 on
Advertisement
Table of Contents
