Button Configuration Overview; Source Button Configuration; Category Button Configuration; Level Button Configuration - GRASS VALLEY L-S series Instruction Manual

Section 2 — Hardware Installation

Button Configuration Overview

Source Button Configuration

Category Button Configuration

Level Button Configuration

Keycap Transparency Labels

46
The SXY panels also have a cluster of 16 buttons on the right side that can
be used for category/number operation. See
on page 46 for more information.
Source button functions are assigned on a panel by creating a Jupiter CP
Input set of type CPESXTND. The set table in this Input set consists of a list
of button numbers and the name of the router input associated with each
button. The CP Input set is assigned to the panel using the MPK Devices
table.
For more information about button configuration, see
Output Sets on page 62.
Category buttons exist on some panels, allowing the pre-selection of cate-
gories of Sources or Destinations. The categories can be customized, by cre-
ating a custom Jupiter CP Category set table. This CP Category set would
then be assigned to the CP Input set, which would in turn be assigned to
the panel using the MPK Devices table.
For more information about button configuration, see
Output Sets on page
62.
Some panels include a cluster of eight buttons on the right side that can be
configured and labeled to select router levels. This can be done by creating
a suitable CP Level set which lists the router levels in the order they should
be available using the eight buttons. The CP Level set is assigned to the
panel using the MPK Devices table.
For more information about level button configuration, see
page 62.
A sheet of pre-cut transparency keycap labels, part no. 335835400, is avail-
able for use with Jupiter L-S Series Control panels. The large labels measure
0.38 x 0.38 inches (9.65 x 9.65 mm). The small labels measure 0.3 x 0.3 inches
(7.62 x 7.62 mm). The font is Helvetica condensed oblique See Figure 18.
JUPITER L-S and LCD Series Control Panel Instruction Manual
Category Button Configuration
CP Input and CP
CP Input and CP
CP Level Set on