Breakaway; Level Grouping; Hold; Multi-Destination Mode - GRASS VALLEY NV9640 User Manual

Table of Contents

Advertisement

Operation
Operating Concepts

Breakaway

Routes can be all-level in which case they are taken on all levels defined for the destination. The
acceptable sources for a route have the same levels as, or some configured mapping to, the
levels of the destination.
A breakaway can occur in X-Y mode. A breakaway is where you take different sources to the
same destination — on different levels.
It is not possible to take different sources to the destination on the same level. For instance, you
cannot take SD from two different sources. The outcome would be noise even if you could do it.
(That is because routers are not mixers.)

Level Grouping

Virtual levels can be grouped. This diagram illustrates grouping:
Video
HD
There are two types of virtual levels: basic and abstract. Basic virtual levels are those that
correspond to actual physical levels. Abstract virtual levels do not correspond to physical levels.
In the illustration, the 5 "Aud x" levels are grouped under 'Audio' . The two video levels are
grouped under 'Video' .
The levels 'Video' and 'Audio' are abstract levels; the other levels are basic levels.
The NV9640, at present, ignores the concept of level groups, and presents any configured
level groups as completely expanded. That is, it always displays basic levels and never
abstract levels.

Hold

Hold mode (and hold buttons) apply in both X-Y mode and multi-destination mode.
Breakaway
In X-Y mode, a hold button retains breakaway levels after a take.
Simply press the hold button at any time before the take.
A hold button is a toggle. Press it once to put the panel in hold mode; press it again to remove
hold mode.

Multi-Destination Mode

In multi-destination mode, hold mode allows you to select more than one MD destination at a
time.

Category Selection

In the NV9000 system, devices are assigned to categories, where the devices within the catego-
ries are either numbered or identified by alphanumeric suffixes. For instance, a category
52
SD
Aud1
Aud2
Audio
Aud3
Aud4
Aud5
. . .

Advertisement

Table of Contents
loading

Table of Contents