Table of Contents
Advertisement
S25/S50
SXY Panels
1
2
3
4
5
6
7
8
9
10
Button Configuration Overview
Source Button Configuration
JUPITER L-S and LCD Series Control Panel Instruction Manual45
It is also possible to configure the panel with a custom category set. See Cat-
egory Button Configuration
The S25 and S50 panels have 25 or 50 buttons on the left side of the panel
that can be used for "Button-per-Source" operation. Using the label sheet,
these buttons can be labeled 1 through25 (or 50 respectively). If the button
assignments are more or less permanent, it might be desirable to label them
more specifically. See Source Button Configuration
mation.
Figure 16. S25
These panels also include a cluster of eight buttons on the right side that
can be configured and labeled to select router levels. See CP Level Set
page 61
for more information.
The SXY panels include a cluster of buttons on the left side that can be con-
figured and labeled to select router levels. See CP Level Set
more information.
Figure 17. SXY Control Panel Showing Level Buttons
Level
Clear
The SXY panels also have a cluster of 16 buttons on the right side that can
be used for category/number operation. See Category Button Configuration
on page 46
for more information.
Source button functions are assigned on a panel by creating a Jupiter CP
Input set of type CPESXTND. The set table in this Input set consists of a list
on page 46
for more information.
Button Labels
on page 45
for more infor-
on
on page 61
for
Protect/
Lock
Advertisement
Table of Contents
