Starting To Embroider; Starting To Embroider Select Hoop; Attaching The Embroidery Hoop; Attach The Hoop To The Embroidery Arm - Bernina 780 User Manual

Starting to embroider

Select hoop
1
2
1
⦁ select embroidery motif
►
the selected motif is displayed in the optimal (the smallest) hoop
►
the «Select hoop»-icon 1 displays the recommended hoop
⦁
attach the recommended hoop

Attaching the embroidery hoop

⦁
raise needle and embroidery foot
⦁ hold the hoop with the right side of the fabric up and the attaching
mechanism to the left

Attach the hoop to the embroidery arm

⦁ guide the hoop underneath the embroidery foot
⦁ press both of the attaching mechanisms of the hoop toward each other
1
⦁ position the center points of the hoop (small attachment clamps) over the
bracket of the embroidery arm
⦁ press down until it clicks in position
⦁ release the attaching mechanism of the hoop

Removing the hoop

⦁
press the attaching mechanisms of the hoop toward each other
⦁
lift the hoop up to remove
⦁
press «Embroidery menu»-button or «Start/Stop»-button on the headframe
►
the hoop moves
►
the hoop is read
033804.52.04_2013-09_Manual_B780_EN
Calibrating the embroidery hoop see page 48.
As soon the «Embroidery menu»-button has been pressed, made
alterationen will not be visible anymore when going back to the
«Edit»-display. The «Information»-icon turns blue again, the function
icons are no longer yellow-framed and the setting is at 100%.
Embroidery motifs
177