How To Create Or Update A Tir; Options; How To Update A Tir Even If Subscriber Mappings Exist; How To Remove Tirs And Subscriber Mappings - Cisco SCE2020-4XGBE-SM Configuration Manual

Software configuration guide
Table of Contents

Advertisement

Subscriber Traffic Processor IP Ranges

Options

The following options are available:

How to Create or Update a TIR

From the SCE(config if)# prompt, type
Step 1
ip-address/mask

How to update a TIR even if subscriber mappings exist

From the SCE(config if)# prompt, type
Step 1
ip-address/mask
If subscriber mappings exist for either the new or the old IP range, they will be removed and the
command will execute successfully.

How to Remove TIRs and Subscriber Mappings

Cisco SCE 2000 and SCE 1000 Software Configuration Guide
9-32
tir-name — meaningful name assigned to this traffic processor IP range
ip-address/mask — IP address and mask defining the IP range
traffic-processornumber — number of the traffic processor to which this TIR is to be assigned
remove-subscriber-mappings — Editing TIRs is permitted only if there are no subscriber
mappings within the relevant IP ranges. Therefore, by default, if subscriber mappings already exist
for the either an updated or an existing IP range, the command will fail. However, you can use this
keyword to specify that any existing subscriber mappings in the IP range should be removed.
In this case the command will execute successfully even if subscriber mappings exist.
traffic-processornumber and press Enter.
target-TP
Creating — Creates a TIR with the specified name and IP range and assigns it to the specified traffic
processor
Updating — Updates the IP range and/or assigned traffic processor for the specified TIR.
Updating the IP range — If subscriber mappings exist for either the new or the old IP range, the
command will fail.
traffic-processornumber remove-subscriber-mappings and press Enter.
target-TP
How to Remove a Specified TIR, page 9-33
How to Remove All TIRs, page 9-33
How to Remove Mappings from a Specified TIR, page 9-33
How to Remove Mappings from a Specified IP Range, page 9-34
subscriber TP-IP-range name
subscriber TP-IP-range name
Chapter 9
Managing Subscribers
tir-name
IP-range
tir-name
IP-range
OL-7827-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sce 2000Sce 1000

Table of Contents