Table of Contents
Advertisement
Chapter 9
Managing Subscribers
How to display the number of subscribers that are greater than or less than a specified value of a subscriber
property
Options
The following options are available:
•
•
From the SCE> prompt, type
Step 1
propertyname
How to display the number of subscribers that match a specified prefix
Options
The following options are available:
•
From the SCE> prompt, type
Step 1
Enter.
Displaying Subscribers: By Mapping (IP Address, VPN, VLAN ID, or MPLS/VPN)
•
•
•
•
•
•
•
You can display the subscribers who are mapped to any of the following:
•
•
•
•
•
You can also display just the number of subscribers with a specified mapping, rather than listing the
actual subscribers.
OL-7827-12
propertyname — name of the subscriber property to match
property-val — value of that subscriber property to match
show interface linecard 0 subscriber amount property
greater-than|less-than
prefix — subscriber prefix to match
show interface linecard 0 subscriber amount prefix
How to display subscribers that are mapped to a specified IP address, or range of IP addresses,
page 9-22
How to display subscribers that are mapped to IP addresses that are included in a given IP address
or IP range, page 9-22
How to display subscribers that are mapped to a specified VLAN ID, page 9-22
How to display subscribers that are mapped to a specified MPLS/VPN, page 9-22
How to display subscribers with no mapping, page 9-23
How to display the number of subscribers that are mapped to a specified VLAN ID, page 9-23
How to display the number of subscribers with no mapping, page 9-23
A specified IP address, or range of IP addresses (may be within a specified VPN)
IP addresses intersecting a given IP address or IP range (may be within a specified VPN)
A specified VLAN ID
A specified MPLS/VPN
no mapping
property-val and press Enter.
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
Monitoring Subscribers
prefix and press
9-21
Advertisement
Table of Contents
