Create A Service Profile - Cisco UCS B440 M1 Manual

b. Verify hardware for the B440−M1 Emulex Adapter details for Interface Card 2.
Verifying Interface Adapter details for slot 2 Interface Card 2
2. Configure the service profile for the B440−M1 Emulex Adapter Interface Card 2:
3. Verify the default virtual interface placement.

Create a Service Profile

Refer to Configuring Service Profiles for further details on service profile creation.
1. Create a service profile for Interface Card 2.
2. Create two vNICs for the service profile created.
a. Server Profile created with default 2 vNICs