Introduction - Cisco SCE2020-4XGBE-SM Configuration Manual

Configuring the Management Interface and
Security
Revised: June 15, 2009, OL-7827-12

Introduction

This module describes how to configure the physical management interfaces (ports) as well as the
various management interface applications, such as SNMP, SSH, and TACACS+. It also explains how to
configure users, passwords, IP configuration, clock and time zone, and domain name settings.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
OL-7827-12
About Management Interface and Security, page 5-2
Configuring the Management Ports, page 5-2
Entering Management Interface Configuration Mode, page 5-3
Configuring the Management Port Physical Parameters, page 5-3
Configuring Management Interface Redundancy, page 5-7
Configuring Management Interface Security, page 5-9
Configuring the Available Interfaces, page 5-11
Configuring and Managing the SNMP Interface, page 5-33
Managing Passwords, page 5-46
IP Configuration, page 5-52
Configuring Time Clocks and Time Zone, page 5-58
Configure SNTP, page 5-64
Configuring Domain Name Server (DNS) Settings, page 5-67
Configuring the Management Port Physical Parameters, page 5-70
C H A P T E R
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
5
5-1