Table of Contents
Advertisement
Intelligent Traffic Mirroring
Traffic Mirroring Sample Configuration
Following is a sample illustrating the steps in configuring the SCE 2000 platform for traffic mirroring.
Command
Step 1
SCE#configure
SCE(config)# interface LineCard 0
Step 2
SCE(config if)# #VAS-traffic-forwarding traffic-link
link-0
Step 3
SCE(config if)#VAS-traffic-forwarding VAS server-id 0
VLAN 640
SCE(config if)#VAS-traffic-forwarding VAS server-id 1
VLAN 641
SCE(config if)#VAS-traffic-forwarding VAS server-id 2
VLAN 642
SCE(config if)#VAS-traffic-forwarding VAS server-id 3
VLAN 643
Step 4
SCE(config if)#VAS-traffic-forwarding VAS server-group
0 server-id 0
SCE(config if)#VAS-traffic-forwarding VAS server-group
0 server-id 1
SCE(config if)#VAS-traffic-forwarding VAS server-group
1 server-id 2
SCE(config if)#VAS-traffic-forwarding VAS server-group
1 server-id 3
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
12-52
Chapter 12
Value Added Services (VAS) Traffic Forwarding
Purpose
Enters LineCard Interface configuration mode
Changes the link on which the mirrored packets are
sent from link-1 which is the default to link-0.
Assign VAS servers 0-3 to VLAN 640-643
respectively.
Map VAS servers 0-1 and 2-3 to server groups 0 and
1 respectively, allowing server redundancy within
each group.
OL-7827-12
Advertisement
Table of Contents
