Table of Contents
Advertisement
Intelligent Traffic Mirroring
Figure 12-13
Figure 12-13
Subscribers
Configuring Traffic Mirroring
Following is a high-level description of the steps in configuring traffic mirroring.
1.
2.
Note
Additional traffic mirroring configuration and monitoring options are available from the SCA BB
Console. See Managing Traffic Mirroring Settings in the Cisco Service Control Application for
Broadband User Guide.
Traffic mirroring is not compatible with regular VAS traffic forwarding.
Note
Cisco SCE 2000 and SCE 1000 Software Configuration Guide
12-50
shows an SCE 2000 platform using traffic ports for mirroring.
Traffic Mirroring over Traffic Ports
Network
Network
Subscribers
Original Traffic
Mirrored Traffic
Configure the SCE platform— define the servers and the server groups
Configure which traffic goes to which Server Group using the SCA BB console.
Chapter 12
Value Added Services (VAS) Traffic Forwarding
Traffic crosses the SCE
through all 4 GBE ports
Mirrored Traffic leaves
the SCE through GBE
ports 3 (subscriber)
Traffic crosses the
and 4 (network). This
SCE through all 4
includes original traffic
GBE ports
using clear IP (or original
encapsulation), and
mirrored traffic using
predefined VLANs.
Each server is located
on a separate vlan, to
allow load sharing
OL-7827-12
Advertisement
Table of Contents
