Table of Contents
Advertisement
Verify
To verify you have configured the interfaces correctly:
•
Note the following:
•
Enter the show rlm group status command and specify the group number:
5300# show rlm group 1 status
RLM Group 1 Status
User/Port: RLM_MGR/3000
Link State: Up
Next tx TID: 1
Server Link Group[r1-server]:
link [10.1.1.1(Loopback1), 10.1.4.1] = socket[active]
link [10.1.1.2(Loopback2), 10.1.4.2] = socket[standby]
Server Link Group[r2-server]:
link [10.1.1.1(Loopback1), 10.1.5.1] = socket[opening]
link [10.1.1.2(Loopback2), 10.1.5.2] = socket[opening]
— The link state must report being up.
— No errors should be reported.
Enter the show isdn status command to view layer status information.
5300# show isdn status
Global ISDN Switchtype = primary-ni
ISDN Serial0:23 interface
dsl 0, interface ISDN Switchtype = primary-ni
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 0 CCBs = 0
ISDN Serial1:23 interface
dsl 1, interface ISDN Switchtype = primary-ni
Layer 1 Status:
DEACTIVATED
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Activated dsl 1 CCBs = 0
Total Allocated ISDN CCBs = 0
Last Link Status Reported: Up
Last rx TID: 0
Verify
Basic Configuration 3-47
Advertisement
Table of Contents
