Table of Contents
Advertisement
Step 12
Step 13
Step 14
Where to Go Next
At this point you can proceed to:
•
•
•
Enter yes to save the configuration, or enter no to erase it:
Use this configuration? [yes/no]: yes
Building configuration...
Use the enabled mode 'configure' command to modify this configuration.
Press RETURN to get started!
%LINK-3-UPDOWN: Interface Ethernet0, changed state to up
%LINK-3-UPDOWN: Interface Serial0, changed state to down
%LINK-3-UPDOWN: Interface Serial1, changed state to down
<Additional messages omitted.>
When the messages stop displaying on your screen, press Enter to get the following
prompt:
5300>
%AT-6-ONLYROUTER: Ethernet0: AppleTalk port enabled; no neighbors found
If you see this message, it means that no other AppleTalk routers were found on
Note
the network attached to the port.
The
prompt indicates that you are now at the command-line interface (CLI) and
5300>
you have just completed the basic access server configuration. However, this is not a
complete configuration. At this point you have two options:
•
Run the setup script in the System Configuration dialog again and create another
configuration. Enter the following commands to repeat the setup script:
5300> enable
Password: <password>
5300# setup
•
Modify the existing configuration or configure additional features with the CLI as
described in the chapter "Basic Configuration," Dial Solutions Guide, Cisco IOS
software configuration guide and command reference publications.
The chapter "Using Cisco IOS Software" to learn how to use the CLI to configure additional
features.
The chapter "Access Service Security" to configure security on the access server.
The Dial Solutions Guide, Cisco IOS software configuration guide and command reference
publications for more advanced configuration topics. These publications are available on the
Documentation CD-ROM that came with your access server, on the World Wide Web from
Cisco's home page, or you can order printed copies.
Using Setup on Cisco IOS Releases 11.2 or 11.3(2)T C-23
Where to Go Next
Advertisement
Table of Contents
