Table of Contents
Advertisement
Step 5
Upgrading Modem Code from Diskettes
This section describes how to copy modem code from diskettes to your hard disk in a PC
environment, and then upload the modem code to the modems. The steps are similar if you are using
a Macintosh or UNIX workstation.
Note If you loaded Cisco IOS software from a feature pack CD-ROM using Router Software
Loader (RSL), note that the CD contains a TFTP server program for PCs using
Microsoft Windows 95. Run the TFTP server program from the directory where you installed the
RSL program. Remember to set the root directory to the directory where the Cisco AS5300 modem
code is located. The RSL and the TFTP applications are also available on CCO in the software
library in the Access Products section.
Copy the Modem Code to Your PC Hard Disk
This section describes how to copy the modem code file to your hard disk in a PC environment. The
steps are similar if you are using a Macintosh or a UNIX workstation.
Step 1
Step 2
Step 3
Copy the Modem Code from Your PC to the Modems
If you are using a PC running Microsoft Windows 95, upgrading modem code from a hard drive onto
a Cisco AS5300 involves installing a TFTP application on your PC, connecting your PC and the
access server, establishing a HyperTerminal session on your PC, pinging the PC and access server
to make sure they are talking to each other, and finally, copying the modem code from the PC to the
access server. See the following sections for details.
Copy the modem code file from the access server system Flash memory to the modems
by entering the copy flash modem command.
5300# copy flash modem
Modem Numbers (<slot>/<port> | group <number> | all)? all
System flash directory:
File
Length
Name/status
1
5826036 c5300-js-mz
2
377112
mcom-modem-code-3.1.30.bin
[6203276 bytes used, 10573940 available, 16777216 total]
Name of file to copy? mcom-modem-code-3.1.30.bin
Copy 'mcom-modem-code-3.1.30.bin' from Flash to modems? [yes/no] yes
[OK - 377112/278528 bytes]
5300#
*Mar
3 03:51:17.147: %MODEM-5-DL_START: Modem (1/15) started firmware download
*Mar
3 03:52:47.519: %MODEM-5-DL_GOOD: Modem (1/15) completed firmware download:
MNPClass10K56flexModemRev3.1.30/85
Insert the modem code diskette into the diskette drive.
Use Microsoft Windows 95 Explorer to create a folder named tftpboot at your hard disk
root c:.
Use the Microsoft Windows 95 Explorer to copy the modem code file into the c:/tftpboot
folder.
Upgrading Modem Code from Diskettes
Managing Modems A-21
Advertisement
Table of Contents
