Table of Contents
Advertisement
Upgrading VoIP Feature Card Firmware
Upgrading VoIP Feature Card Firmware
To download software to your VFC, you need to:
•
•
•
•
Determine the number of VFC cards
To determine the number of VFC in the system and what slot they are on, perform the following task
in privileged EXEC (enable) mode:
Step
1
2
Identify the VFC ROM Monitor Version
To identify the VFC ROM Monitor software version, perform the following task in privileged EXEC
(enable) mode:
Step
1
2
D-2
Cisco AS5300 Universal Access Server Software Configuration Guide
Determine the number of VFC cards in the system.
Check to see that the version of VFC ROM Monitor software is compatible with your installed
Cisco IOS image. VFC ROM version 1.2 requires Cisco IOS image 0.14.1 (1.6 NA1) or later.
VFC ROM Monitor version 1.2 can be made to work with Cisco IOS image 0.13 (or later) by
appending the suffix ".VCW" to the VCWare image stored in VFC Flash memory.
Determine whether the VFC is in VCWare mode or ROM Monitor mode. This determines how
you download software to the VFC.
Download the software using the appropriate procedure.
Command
5300> enable
Password: <password>
5300#
5300# show vfc 0 board
show vfc 1 board
show vfc 1 board
5300#
Command
5300> enable
Password: <password>
5300#
5300# show vfc slot_number
version vcware
5300#
Purpose
Enter enable mode.
Enter the password.
You have entered enable mode when the
prompt changes to
.
5300#
Use the procedures in this section to
upgrade the software for each card in the
system that needs to be updated.
Purpose
Enter enable mode.
Enter the password.
You have entered enable mode when the
prompt changes to
.
5300#
Show the VFC ROM Monitor version
your selected voice card is running.
Advertisement
Table of Contents
