Table of Contents
Advertisement
Monitoring Modems
Table A-2
Step Command
3
Modem Performance Statistics Commands
You can view modem statistics and configure modem events using the Cisco IOS software with the
Cisco AS5300 access server. To view performance statistics for the Microcom and MICA modems,
enter one or more of the following commands in enable mode (the prompt is displayed as
•
•
•
•
•
•
•
•
•
•
•
•
•
To view additional performance statistics for MICA modems only, enter one or more of the following
commands in EXEC mode:
•
•
•
A-4
Cisco AS5300 Universal Access Server Software Configuration Guide
Entering AT Command Mode for MICA Modems (Continued)
Ctrl-Shift-6 X
5300# disconnect
show modem [slot/modem | group number]—Show various performance statistics for a modem
or group of modems.
show modem at-mode—Display all directly connected AT sessions active on the access server.
This command applies to Microcom modems only.
show modem call-stats—Display the calling statistics for all the modems in the system.
show modem mapping—List all Cisco IOS software and modem code files (bundled and
unbundled) and their versions in the system Flash memory. This will help you decide if you need
to update your modem code files.
show modem configuration [slot/modem-port | group number]—Display the modem
configuration for a single or group of modems. This command applies to MICA modems only.
show modem connect-speeds—Display the connection speeds for all the modems in the system.
show modem csm [slot/modem-port | group number]—Show the call-switching module status
for a single or group of modems.
show modem group—Display group information for the modems.
show modem log [slot/modem-port | group number]—Show the event log status for a modem or
group of modems. This command applies to Microcom modems only.
show modem operational-status [slot/modem | group number]—Display the operational status
for all the modems in the system. This command applies to MICA modems only.
show modem summary—Display the cumulative system statistics for all installed modems.
show modem test—Display the modem test log, which is the result of the modem configuration
command.
show modem version—Display version information for all the modems in the system.
show modem mica slot—Show information for all installed MICA boards.
show modem mica slot number—Show information about a specific MICA board.
show modem mica [slot/modem-port ]—Show information for a specific modem on a specific
slot.
Purpose
To exit AT command mode and return to
enable mode, enter Ctrl-Sh-6 X (hold
down the Control and Shift keys and
press 6, then release everything and press
X).
Enter disconnect to end the Telnet
connection.
5300#
):
Advertisement
Table of Contents
