Configuring Voip; Where To Go Next - Cisco Universal Access Server AS5300 Quick Start Manual

Configuring VoIP

The actual configuration procedure depends entirely upon the topology of your voice network, but, in general, you need to
complete the following configuration tasks:
1. Configure IP Networks for Real-Time Voice Traffic.
2. Configuring Voice Ports for ISDN PRI.
3. Configuring the D Channels.
4. Configuring the Dial Peers.
5. Configuring Voice Network Data.
For detailed procedures, see the Cisco AS5300 Universal Access Server Software Configuration Guide. You can access this
document at: Cisco Product Documentation > Access Servers & Routers > Access Routers > Cisco AS5300 > Configuration
Documents for Cisco AS5300 > AS5300 Software Configuration Guide
For detailed examples of command output, see the Voice Over IP for the Cisco AS5300 Configuration Guide. You can access
this document at: Cisco Product Documentation > Access Servers & Routers > Access Routers > Cisco AS5300 > Configuration
Documents for Cisco AS5300 > VoIP Information > Voice over IP for the Cisco AS5300
For additional voice configuration see the Cisco IOS Voice, Video, and Fax Configuration Guide. You can access this
documentatio at: Cisco Product Documentation > Cisco IOS Software Configuration > Cisco IOS Software Release you are
using > Configuration Guides and Command References > Cisco IOS Voice, Video, and Fax Configuration Guide

Where to Go Next

For additional specialized configuration procedures, refer to the appropriate Cisco IOS software configuration documentation,
available on the Documentation CD-ROM and on Cisco.com:
Tip See the "User Documentation" section on page 2 for help in locating these documents.
For detailed configuration information specific to the Cisco AS5300:
Cisco AS5300 Universal Access Server Software Configuration Guide.
You can access this document at: Cisco Product Documentation > Access Servers & Routers > Access Routers > Cisco
AS5300 > Configuration Documents for Cisco AS5300 > AS5300 Software Configuration Guide
For detailed configuration information for specific features:
Configuration Guides and Command References for the Cisco IOS software release installed on your Cisco router.
You can access these documents at: Cisco Product Documentation > Cisco IOS Software Configuration
> Cisco IOS Software Release you are using > Configuration Guides and Command References
For new features associated with a specific software release:
New feature documentation for the Cisco IOS software release installed on your Cisco router.
You can access these documents at: Cisco Product Documentation > Cisco IOS Software Configuration
> Cisco IOS Software Release you are using > New Feature Documentation
Feature Navigator
If you have an account on Cisco.com, you can get updated information about platform support for features by accessing
Feature Navigator at the following URL:
http://tools.cisco.com/ITDIT/CFN/
20