Printing Or Scanning Procedure - Konica Minolta MS7000 MK II User Manual

3
3.8

Printing or Scanning Procedure

Here is an outline of the printing or scanning procedure:
1. Load the film
The procedure for loading film is determined by the type of Film Carrier (optional) that is being
used. Review the Operator's Manual that came with your Film Carrier for more information.
2. Select and replace the Lens → See page 3-22, 3-23.
Select the appropriate lens for the type of film being used and install it in the Scanner.
3. Select the Connection Mode → See page 3-45.
Select either PC connection mode or PR connection mode.
4. Zooming, focusing and image rotation → See page 3-25.
Use the Zooming Ring Dial to frame a desired range of the image on the screen for printing.
Use the Focus keys to sharpen the clarity of the image on the screen.
Use the Image Rotation Knob to orient the image on the screen.
*Press the Auto Skew Correction key to have the skew of the image automatically corrected.
5. Select the paper size → See page 3-29.
Select the appropriate paper size. If both A4
correct size automatically.
Use Auto (auto paper selection). → See page 3-29.
6. Select the print position → See page 3-31.
Use the Print Position key to select between Left, Center or Page-by-Page.
7. Select the image density → See page 3-32.
Use Auto Exposure to automatically determine the optimum image density for the application.
The image density can also be set manually by using the Exposure Adjustment keys (Darker or
Lighter).
8. Enter the number of prints to be made → See page 3-34.
Using the Multi-Print keys (10, 1), enter the number of prints to be made.
9. If required, adjust the image processing functions.
Auto Masking → See page 3-35.
Manual Masking → See page 3-37.
Image Centering → See page 3-41.
10. Press the Start key.
3-21
The printing of the image appearing on the screen is initiated
after the Start key is pressed.
and A3 are loaded, the system can select the
Scanner