Control Panel 1 (Shift Function) - Konica Minolta MS7000 MK II User Manual

3

Control Panel 1 (Shift Function)

Film Type
Auto
Nega
Posi
Job Recall
1
Job Recall Key
1
When this key is pressed together with the Shift Key, the program
registration locations (1J, 2J and 3J) are called. Each time this key is
pressed while the Shift Key is held down, the display is switched in order
of 1J → 2J → 3J.
Resolution Key
2
When this key is pressed together with the Shift Key, the resolution of the
Scanner is set.
When the Scanner is connected to the MSP 3500 Printer: 6H
When the Scanner is connected to the MSP 3000 Printer: 4H and 6H
When the Scanner is connected to the PC: 2H, 3H, 4H, 6H and 8H
* 4H represents 400dpi and 6H represents 600dpi.
User Mode Key
3
Pressing this key together with the Shift Key enters the unit into the User
Mode.
Zoom Key
4
When this key is pressed together with the Shift Key, the electrical zoom
magnification is set.
Zoom+:
Zoom clr: When this key is held down together with the Shift Key for one
Zoom-:
PC/PR Key
5
When this key is pressed together with the Shift Key, the connection to the
PC or to the Printer is selected.
Shift Key
6
Executes an expansion function when being pressed together with the
intended function key.
3-9
Print Mode Print Position Paper Selection
8 ×11
1 2
Text /
11×17
8 ×11
Fine 1 2
/
8 ×11
1 2
Photo / Other
1 2
Resolusion User Mode
2 3
See page 8-5 User Mode.
When this key is pressed together with the Shift Key, the
magnification is increased by an increment of 0.01X (up to
2.00X).
second, the standard magnification is resumed.
When this key is pressed together with the Shift Key, the
magnification is decreased by a decrement of 0.01X (down to
0.50X).
Exposure
Lighter Auto Darker
10 1
Zoom- Zoom clr Zoom+ PC/PR
4
Scanner
C Start
Shift
5 6