Cleaning The System Printer (Option); Cleaning The Msp 3500 Printer - Konica Minolta MS7000 MK II User Manual

Maintenance

Cleaning the System Printer (Option)

Clean the Printer at regular intervals.

Cleaning the MSP 3500 Printer

When does the printer need cleaning?
Clean this item thoroughly...
Exterior
Interior (paper feed rollers)
Note: We recommend that you do not clean elsewhere inside the printer.
If necessary, contact the authorized dealer.
What cleaning materials should I use?
⎯
Exterior
A soft dry cloth to clean the control
panel.
A soft, wrung-out damp cloth to clean
the outside of the printer.
Mild neutral detergent to clean the
outside of the printer, if necessary.
Interior Paper Feed Rollers
A soft dry clean cloth.
Use
⎯
Use
After...
Once a month or as needed, whichever
comes first.
Paper stops being fed from the paper
tray(s).
⎯
Exterior Avoid
Sharp or rough implements (such as
wire or plastic cleaning pads or
brushes); liquids.
Aerosol or pump-sprayed cleaners; too
much dampness in the cloth.
Abrasive or corrosive solutions that
contain solvents (such as alcohol,
benzine, or thinners).
⎯
Interior Avoid
Sharp or rough implements (such as
wire or plastic cleaning pads or
brushes); any liquids.
7
7-3