Using An Operation Panel; Making Scanning Condition Settings - Konica Minolta PS5000C MKII Operator's Manual

3 Using an operation panel

An operation panel can be used to set scanning conditions.
Scanning conditions can be set from an operation panel when the "READY" screen
is displayed.
NOTE !
3.1

Making scanning condition settings

Key descriptions
SET
ESC
Pressing the "SET" key while the "READY" screen is displayed displays the
settings menu.
The settings menu contains the following 6 items: "DOC TYPE", "DOC PAGE",
"DOC SIZE", "DOC MODE", "FRAME MASKING", "CENTER ERASE"
DOC TYPE
Available settings: "BOOK", "SHEET", "3D"
An operation panel cannot be used if the following message is
•
displayed on the panel.
If you wish to use a disabled operation panel, please contact your
•
authorized service representative.
Highlight the item to be set.
Select the highlighted item.
Return to the settings menu.
Chapter 4 Operation
4-5