Konica Minolta MS7000 MK II User Manual page 150

8
System Settings
Contrast setting
The print function
at the time of
Toner Empty or
Toner Cartridge
Life detection
(PR mode only)
Auto Film Format
Select print
function
(PR mode only)
90 degree
rotation setting
Automatic paper
source switching
* To change any of the system settings described above, contact the au-
thorized dealer.
8-14
Description
To view subtle images with standard
ranges of density clearly: Light (-1 ~ -7)
To bring out the darker and lighter
ranges of an image: Dark (+1 ~ +7)
After a toner empty condition or toner
cartridge life is detected, this function
allows you to select either to stop print-
ing or continue printing.
* Toner cartridge life detection is only
connected with MSP3500.
(When selected the enable print after
the Toner Catridge life fulfillment,
while depress the Start key, LED dis-
plays the toner cartridge life fulfillment
"TE".)
The Auto Format Select Print Function
is enable or disable through the control
panel.
Enables the prism to rotate the screen
image 90 degrees.
Allows you to specify the paper source
when Letter or A4 size paper is loaded
in Lengthwise or Crosswise orienta-
tions into the both paper feeding tray
and paper feeding cassette.
Auto switching: Printing continues by
automatically switching to the remain-
ing paper source after paper in the
specified paper source runs out.
Disabling Auto Switching: A paper
empty mode occurs and printing ceas-
es after paper in the specified paper
source runs out. The paper source
must be refilled or the paper source
must be switched by pressing the Out-
put Selection Key in order to resume
printing.
Miscellaneous
Selection Initial Setting
Lighter
*
Normal
Darker
*
Empty >>
Disable
Print
Life >>
Disable
Print
Empty >>
Enable Print
Life >>
Disable
Print
Empty >>
Enable Print
Life >>
Enable Print
*
Enable (200V)
*
Disable (120V)
Enable
*
Disable
*
Auto
Switching
Disabling
Auto
Switching