Control Panel 2 - Konica Minolta MS7000 MK II User Manual

Scanner

Control Panel 2

Centering Fit
1
Centering/Fit Key
1
When this key is pressed, the setting rotates from OFF to the Centering
and Fit functions. Auto Masking* is automatically enabled when the
Centering function is selected.
* Auto Masking is not enabled if Trimming is selected.
Centering:
Fit:
Centering and Fit are not disabled when Auto Masking is selected.
Masking Key
2
When pressed, this key rotates from OFF to the Trimming or Masking
functions if the system is equipped with an optional Manual Masking Kit.
Masking:
Trimming:
• If Trimming is selected from the OFF state, the previously entered
settings for Centering/Fit and Manual Masking are applied.
• From Trimming, when Masking is selected, the Centering/Fit setting is
disabled and the previous settings for the Masking area are applied.
• The manual masking area will be cancelled whenever OFF is selected
from the Masking state.
* Neither Trimming nor Masking are available through the Auto Masking
function.
* Trimming and Masking cannot be set when the Scanner is connected to
the PC.
Masking Auto Auto Skew
Masking Correction
2 3 4
The system centers all masked images onto the
printed page.
The system enlarges the image on the screen to
fill the page when printed.
Enlargement is only to the full length or width of
the paper, whichever is achieved first.
Prints only the image outside of the area that is
defined on the Screen.
Prints only the area of the image that is defined on
the Screen.
Focus AF
5 6
3
3-10