Replacing The Feed Module And Feed Module Tires; Replacing The Feed Module - Kodak I810 - Scanner Firmware - PC User Manual

Replacing the feed
module and feed
module tires
Replacing the feed
module
5-12
This section provides replacement procedures for the feed module and
the feed module tires.
To replace the feed module:
1. Open the swing out door.
2. Push the release lever to the right to release the feed module.
3. Remove the feed module.
To install the new feed module:
4. Push the release lever to the right and reinsert the new feed module
by aligning the pins and fitting it into position. When the feed module
is in position, release the lever and be sure the feed module is
securely in place.
5. Close the swing out door.
A-61169 January 2005