Jogging The Transport; Programmable Key Assignments - Kodak I810 - Scanner Firmware - PC User Manual

Jogging the transport

Programmable key
assignments
3-14
The Jog button temporarily (4 seconds) turns on the transport to help
clear a document jam. This function is only available when the scanner is
disabled. The Jog button is intended to clear simple document jams. If
documents are lodged in several locations within the scanner, use the
procedures in Chapter 6, Troubleshooting/Messages.
If a document jam occurs:
Select the Jog
There are three programmable keys on the Operator Control Panel.
These keys can be assigned functions by the host application.
Programmable keys are available for use when the scanner is enabled.
The Operator Control Panel displays the numbers 1 through 3. These
numbers correspond to the buttons on the Control Panel.
Each of the programmable keys can be assigned the following functions:
No Scanner Functionality (default)
Scanner End-of-Job
Terminate Batch
Skip Multi-feed Detection
Skip Printing
Skip Patch Recognition
Check with your System Administrator to determine what functions are
programmed.
icon.
A-61169 January 2005