Changing The Display Contrast; Changing The Scsi Id - Kodak I810 - Scanner Firmware - PC User Manual

Changing the display
contrast

Changing the SCSI ID

3-10
This setting allows you to adjust the contrast of the display screen from
0 to 4. 0 = lightest, 4 = darkest.
To change the display contrast:
1. Select the Diagnostics Settings menu
2. Use the right or left arrow to navigate to the Settings function.
3. Use the down arrow to select Change Display Contrast.
Exit Diagnostics
Change Alarm Volume
Change Display Contrast
Change SCSI ID
Change SCSI Termination
4. Select Return.
Contrast level : 3
5. Use the up and down arrows to select the desired contrast.
6. Select Return.
This setting allows you to enter the SCSI ID number (0 to 7). The SCSI ID
should not be changed unless directed to do so by your integrator or
Kodak Field Representative.
If the SCSI ID has been changed, you must reboot the scanner. After the
scanner has been powered up and completed the self-test, reboot the
host PC.
To change the SCSI ID:
1. Select the Diagnostics Settings menu
2. Use the right or left arrow to navigate to the Settings function.
icon.
Settings
icon.
A-61169 January 2005