Separation Roller And Tires; Replacing The Separation Roller - Kodak I810 - Scanner Firmware - PC User Manual

Separation roller and
tires
Replacing the separation
roller
A-61169 January 2005
This section provides procedures for changing the separation roller and
tires.
To replace the separation roller:
1. Open the swing out door.
2. Lift the roller cover.
3. Pull the separation pad holder forward and remove the separation
roller.
To install the new separation roller:
4. Pull the separation pad holder forward and put the new separation
roller in place.
NOTE: Be sure to line up the slots on the separation roller with the
holders.
5. Push the separation roller holder back in place.
6. Lower the roller cover.
7. Close the swing out door.
5-15