Cleaning The Imaging Guides - Kodak I810 - Scanner Firmware - PC User Manual

Cleaning the imaging
guides
5-10
Avoid getting fingerprints on the imaging guides during the cleaning
procedure.
1. Open the bi-fold door.
2. Get the upper imaging guide that was set aside previously. Clean the
upper imaging guide with a clean, soft, lint-free cloth slightly
moistened with water. Lightly wipe both sides with a Staticide wipe.
3. Reinstall the upper imaging guide. Make sure the notched side is
facing up and that the imaging guide is pushed in all the way and fully
seated in its slot.
4. Get the lower imaging guide that was set aside previously. Clean the
lower imaging guide with a clean, soft, lint-free cloth slightly
moistened with water. Lightly wipe both sides with a Staticide wipe.
5. Reinstall the lower imaging guide. Make sure the notched side is
facing down and that the imaging guide is pushed in all the way and
fully seated in its slot.
6. Close the bi-fold door.
A-61169 January 2005