Using The Settings Menu; Changing The Alarm Volume - Kodak I810 - Scanner Firmware - PC User Manual

Using the Settings
menu
Changing the alarm
volume
A-61169 January 2005
The Menu icon
Exit Diagnostics
The following Settings functions are available:

Changing the Alarm Volume

Changing the Display Contrast
Changing the SCSI ID
Changing the SCSI Termination
Setting the Elevator Position
This setting allows you to adjust the volume of the alarm from 0 to 4.
1 = quietest; 4 = loudest; 0 = no sound.
To set the alarm volume:
1. Select the Diagnostics Settings menu
2. Use the right or left arrow to navigate to the Settings function.
3. Use the down arrow to Change Alarm Volume.
Exit Diagnostics
Change Alarm Volume
Change Display Contrast
Change SCSI ID
Change SCSI Termination
4. Select Return.
Alarm volume : 3
5. Use the up or down arrows to select the desired volume.
6. Select Return.
displays the Diagnostics Settings menu.
Settings
Settings
icon.
3-9