Trunk Tab; Vlan Tab; Figure 5-9: Trunk Configuration; Figure 5-10: 802.1Q Vlan - Linksys SRW224 User Manual

24-port 10/100 + 2-Port Gigabit Switch with WebView

Trunk Tab

This tab allows you to configure the trunk group. Select the port, then select if it is a normal port, then select the
group you want to add the port to.
Click Apply when finished with your changes.

Figure 5-9: Trunk Configuration

VLAN Tab

VLAN Configuration
This tab allows you to configure the VLAN feature.
To configure the VLAN, select PortBased or 802.1Q from the drop-down menu. To disable this feature, select
Disable. I
802.1Q VLAN Mode
The VLAN Group list will display the existing VLAN groups. To add a VLAN group, click Add New. To delete a group
from the list, click Delete. Click Click Advanced 802.1Q VLAN Setting to change settings.
Click Apply to save the changes.

Figure 5-10: 802.1Q VLAN

Chapter 5: Configuring the Switch through the Web Utility 23
Trunk Tab